EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Charge Controller is usually a very successful photo voltaic controller created for off-grid photo voltaic systems. Depending on multiphase synchronous rectification technologies, it assures optimized Strength conversion and process balance for a wide array of photovoltaic (PV) applications.

Essential Features from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller know-how for superior photo voltaic energy harvesting. Key features consist of:

Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display with genuine-time data checking.
Several Load Regulate Modes including manual and timer.
In depth Digital Protections from overcharging, over-discharging, quick circuits, and reverse polarity.
Phase-by-Stage Guidebook to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and user manual.
Verify the design variety and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Find a very well-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the offered mounting brackets.
Keep good clearance for heat dissipation.
3. Wiring the Solar Cost Controller
Caution: Generally comply with good protection protocols and make sure the technique is powered off prior to connecting factors.

Move 1: Link the battery terminals to the demand controller (beneficial to constructive, damaging to unfavorable).
Action two: Join the solar panel array on the PV enter terminals.
Stage 3: Hook up the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power about the Click Here controller by connecting the battery initial.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Info Logging
The Tracer AN Series supports authentic-time monitoring using the MT50 distant meter.
Information can be logged by means of the RS485 communication port applying software package including Solar Station Laptop.
Remote monitoring is feasible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Troubles
Problem one: No Energy Output

Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: In excess of-Voltage Safety

Confirm the solar array’s voltage score.
Modify process parameters if required.
Challenge three: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT configurations from the menu.
Benefits of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification technologies makes sure:

Larger Performance: Decreased Electricity losses throughout conversion.
Increased Reliability: Stable general performance below variable hundreds.
For a longer time Battery Existence: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is definitely an Fantastic choice for optimizing solar power era and increasing battery lifestyle. By pursuing the above setup tutorial, customers can guarantee maximum efficiency and process longevity.